Pipework
Triangle Fire Systems use Blazemaster CPVC pipe.
CPVC is an engineered thermoplastic piping material that has been used successfully for many years in a wide range of demanding applications, including fire sprinkler systems.
It does not support fire, and will only char when subjected to flame. In fire conditions, it performs superbly, and it has a twenty year proven track record for this application. As may be expected, the system is fully tested and approved by UL, FM and LPCB, as well as being accepted by all leading insurers. In the UK the product has also been tested and is listed by WRAS for use in contact with cold potable water.
Joints are made using a cold solvent welding process that requires only a few simple tools. Pipe lengths can be cut and prepared on the spot, eliminating the need for power saws, threading tools or welding torches. There is no oil or grease on the pipe - minimising the risk of damage or mess in the work area.
In retro-fit applications, this means that buildings can continue to be occupied during installation with only minimal disruption.
CVPC does not corrode and is designed for continuous use with a life expectancy of over 50 years with a safety factor of 2:1. In the event of exposure to fire, the material will not support combustion. It has very low smoke generation and has very low toxicity compared to other building materials.
Approvals:
CPVC fire sprinkler systems are approved by the following organisations:
- Loss Prevention Certification Board (LPCB)
- Underwriters Laboratories (UL)
- Factory Mutual System (FM)
- National Fire Protection Association (NFPA) – Standards 13, 13D and 13R and 90A.
- Water Regulations Advisory Scheme (WRAS) - for use with cold potable water
Specifications:
CPVC fire sprinkler systems meet or exceed the requirements of the following standards:
- Raw Material - ASTM D1784
- Pipe - ASTM F442
- Fittings - ASTM F437, F438 and F439
The system is manufactured under accredited quality systems by:
- Pipe - Marvel Plastics, Inc. (ISO 9002)
- Fittings - Spears Manufacturing Co. (ISO 9001)
It is distributed under an accredited quality system by:
- International Plastic Systems Ltd. (ISO 9001:2000)