Outlets
Dry risers outlets are placed on each floor of the building and are normally within a cabinet. The cabinet would need an aperture of 640mm high x 460mm wide x 275mm deep.
Cabinets can be supplied in Red or Stainless Steel, satin polished.
All outlets suppplied and installed by Triangle Fire Systems are to BS5041 Part 4.
Dry riser gate valves are used as the outlets from the riser on each floor.
These valves complete with inlet flanged, blank cap, chain, strap and padlock.
Dry riser gate valves must comply with BS5041 part 2.
For advice or a free Dry Riser quotation, please contact Triangle Fire Systems on 01424 812557
or Email: info@trianglefiresystems.co.uk